Skip to main content
  1. book/

Tell me about my hardware.

·405 words
Andy Jackson
Andy Jackson
Fighting entropy since 1993
Table of Contents

This section covers ways of finding out about your hardware without opening the box. It’s mostly UNIX stuff to be used from the command line. If you want to write programs that determine this stuff, you might find this Rosetta Stone API page useful.

Linux #

$ uname -a
Linux 2.6.9-42.0.3.ELsmp #1 SMP Mon Sep 25 17:28:02 EDT 2006 
i686 i686 i386 GNU/Linux

Memory #

On linux, you can find out what memory your machine has like this:

$ free -m
            total       used       free     shared    buffers     cached
Mem:           239        235          4          0          0         31
-/+ buffers/cache:        202         36
Swap:         2000        216       1783

Or you can use

$ cat /proc/meminfo       
MemTotal:       245228 kB
MemFree:          5264 kB
Buffers:           408 kB 
Cached:          40896 kB
SwapCached:      92316 kB
Active:         168328 kB
Inactive:        54412 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       245228 kB
LowFree:          5264 kB
SwapTotal:     2048248 kB
SwapFree:      1891664 kB
Dirty:             148 kB
Writeback:           0 kB
Mapped:         185496 kB
Slab:            12484 kB
CommitLimit:   2170860 kB
Committed_AS:   416392 kB
PageTables:       1996 kB
VmallocTotal:   782328 kB
VmallocUsed:      2260 kB
VmallocChunk:   780052 kB

Or even:

$ dmesg | grep MEM
0MB HIGHMEM available.
247MB LOWMEM available.
MEM window: ea000000-ebffffff

Or, if you can access the machine, watch out for it on boot or check via the BIOS. More info can be found on this Linux and Memory web page, including how to get a machine to recognise memory that is going unnoticed.

What about my CPUs? #

You can find out about the CPU’s on your machine using this command:

cat /proc/cpuinfo

Or using this command:


Be warned that on hyperthreaded systems, one or more real CPUs may be managed as two or more virtual processors. My machine in Edinburgh shows up 4 CPU cores, but actually only has two. I’m not sure how to detect this from the command line.

Solaris #

$ uname -a
SunOS frontend 5.9 Generic_112233-12 sun4u sparc SUNW,Sun-Fire-15000

Memory #

You can find out about your memory, cpu’s and peripherals using


Or, if that doesn’t work, you could try:

/usr/platform/`uname -i`/sbin/prtdiag


This will provide more wordy CPU info:

/usr/sbin/psrinfo -v

All sorts of kernel info #

A remarkably large about of impenetrable information is unleashed my typing:


Not sure what much of it means though.

Windows #

Much information is available via


OS X #

To look up the available memory, you can use this

sysctl -n hw.physmem